arrow_back
In Depth
In Depth · 7 min read

Earth’s Interior, Seismic Waves and How Earthquakes Are Measured

The depths of the crust, mantle and core were measured with seismic waves, not drills. The same waves are used today to locate every earthquake and measure its size.

Earth’s Layers: Crust, Mantle, Outer Core and Inner Core

The Earth has four main layers, defined by how seismic waves travel through them. The outermost is the crust. Continental crust is the more variable in thickness and averages about 30–35 kilometers, while oceanic crust generally extends only to about 5 kilometers (Kious and Tilling 1996).

Below the crust lies the mantle, a layer of hot, dense rock that reaches down to the core. In the Preliminary Reference Earth Model (PREM), a widely used model of the planet’s average properties by depth, the core has a radius of 3,480 kilometers, which places the core–mantle boundary roughly 2,900 kilometers below the surface (Dziewonski and Anderson 1981).

The core has two parts. The outer core is liquid, and the inner core is solid, with a radius of 1,221.5 kilometers in PREM, so its surface lies about 5,150 kilometers down (Dziewonski and Anderson 1981). PREM was built by fitting about 1,000 periods of the Earth’s free oscillations and 500 summary travel-time observations, together with the planet’s mass and moment of inertia (Dziewonski and Anderson 1981). None of these figures comes from direct sampling. Each boundary was found because seismic waves change speed, bend, reflect or disappear there.

P Waves, S Waves and Surface Waves

An earthquake releases several kinds of seismic waves. Body waves travel through the interior of the Earth, and surface waves travel along its outer layers. P waves, or primary waves, are the fastest and arrive first at a recording station. They compress and stretch rock along their direction of travel. S waves, or secondary waves, shear the rock at right angles to their direction of travel and arrive later. In rock, S waves generally travel at about 60 percent of the speed of P waves (USGS n.d.a).

Surface waves arrive after both kinds of body waves. Love waves move the ground from side to side, and Rayleigh waves roll it in an elliptical motion. Rayleigh waves produce most of the shaking felt at the ground surface during an earthquake (USGS n.d.a).

The difference between P and S waves carries the key to the deep Earth. A liquid has no resistance to shearing, so S waves cannot pass through one. P waves can travel through solids and liquids alike, although they slow down and change direction when they enter a liquid layer (USGS n.d.b).

The Shadow Zone and Why S Waves Do Not Cross the Outer Core

Seismic stations on the far side of the planet from a large earthquake record a distinctive gap. USGS describes the shadow zone as the area between angular distances of 104 and 140 degrees from the earthquake that receives no direct P waves (USGS n.d.b). The liquid outer core causes it in two ways: it stops S waves entirely, and it refracts P waves, bending them away from that band (USGS n.d.b). Direct S waves are absent from about 104 degrees outward.

Richard Dixon Oldham first identified the core from earthquake records in 1906 (Oldham 1906; Brush 1980). The failure to detect S waves crossing the core was not, on its own, enough to convince seismologists that the core is fluid (Brush 1980). Harold Jeffreys made the stronger case in 1926. Using Earth tides and seismic observations, he showed that the core has much lower rigidity than the mantle and could be liquid (Jeffreys 1926; Brush 1980).

Mohorovičić, Gutenberg and Lehmann: Discovering the Moho and the Inner Core

On 8 October 1909, an earthquake struck the Kupa Valley south of Zagreb. Andrija Mohorovičić, a seismologist in Zagreb, collected its seismograms from stations across Europe and noticed that beyond a certain distance P waves arrived earlier than a single uniform layer would allow. He explained the early arrivals as waves that had dipped into a deeper, faster layer and returned. From his data he estimated the upper layer to be 54 kilometers thick (Herak and Herak 2007). He published the analysis in 1910 (Mohorovičić 1910). The boundary between the crust and the mantle is now called the Mohorovičić discontinuity, or the Moho.

Beno Gutenberg located the core’s outer edge. Working at Göttingen, he used the shadow zone in records of distant earthquakes to place the core–mantle boundary at a depth of about 2,900 kilometers, published in 1914 (Gutenberg 1914; Brush 1980). Modern models place it at almost the same depth (Dziewonski and Anderson 1981).

Inge Lehmann, a Danish seismologist, found the inner core. Studying records of a large 1929 earthquake in New Zealand, she examined weak P waves that arrived inside the shadow zone, where a fully liquid core should have left none. In a 1936 paper titled simply P′, she proposed that the waves had been deflected by a smaller inner core inside the liquid outer core (Lehmann 1936; Kölbl-Ebert 2001). The inference that this inner core is solid came later. In 1971 Adam Dziewonski and Freeman Gilbert showed from the Earth’s free oscillations that no model with a liquid inner core could satisfy the data (Dziewonski and Gilbert 1971).

How Seismometers Locate an Earthquake: Epicenter, Hypocenter and Depth

An earthquake begins at the hypocenter, also called the focus, the point inside the Earth where the rupture starts. The epicenter is the point on the surface directly above it, and the focal depth is the distance between the two (USGS n.d.c).

Locating an earthquake starts with arrival times. Because P waves outrun S waves, the gap between their arrivals grows with distance, and seismologists convert it into a distance using standard travel-time curves (IRIS n.d.). One station gives a circle of possible epicenters, two stations give two circles that cross at two points, and three stations narrow the solution to a single location. The method is commonly called triangulation (IRIS n.d.).

Modern networks work in three dimensions and solve for the origin time as well. In the Yellowstone region, for example, a computer starts from an initial guess of the hypocenter, uses a model of seismic wave speeds in the region to calculate the expected arrival time at each station, and adjusts the location and origin time until the calculated times fit the measured ones. The more stations that record an earthquake, the more accurate the location, and an earthquake recorded on only one or two stations cannot be located (USGS n.d.d).

Depth is the hardest part of the solution to pin down. As a rule of thumb, a reliable depth requires a station closer to the epicenter than the earthquake is deep (USGS n.d.e). When the data cannot resolve depth, the catalog fixes it at a default value, now 10 kilometers for shallow events (USGS n.d.e). For the best-located earthquakes, in the middle of dense networks, location uncertainty is about 100 meters horizontally and 300 meters vertically; for events located with global data it grows to tens of kilometers (USGS n.d.f). USGS classes earthquakes between 0 and 70 kilometers deep as shallow, those between 70 and 300 kilometers as intermediate, and those between 300 and 700 kilometers as deep (USGS n.d.c).

Earthquake Magnitude Scales: From the Richter Scale to Moment Magnitude

Charles Richter published the first instrumental magnitude scale in 1935, for earthquakes in southern California (Richter 1935). Now labeled ML, for local magnitude, it is based on the maximum amplitude recorded on a Wood-Anderson torsion seismograph at a known distance. Those instruments are no longer widely used, so ML is calculated from modern instruments with adjustments. USGS lists its useful range as roughly magnitude 2.0 to 6.5, for stations up to about 600 kilometers away (USGS n.d.g).

The scale was later extended into body-wave magnitude (mb) and surface-wave magnitude (Ms) to make use of seismograph stations around the world. Each is valid for a particular frequency range and type of seismic signal (USGS n.d.h). All of these scales share a weakness: for great earthquakes, the amplitude of the measured waves stops growing in step with the size of the rupture. Kanamori (1977) showed that this saturation leads to inaccurate estimates of the energy released in the largest events.

The remedy was to measure the physical size of the rupture. Seismic moment is the product of the rigidity of the rock, the area of the fault that slipped and the average distance it slipped (USGS n.d.i). Thomas Hanks and Hiroo Kanamori defined the moment magnitude scale, Mw, from the seismic moment in 1979 (Hanks and Kanamori 1979), building on Kanamori’s 1977 work, which found that the scale does not saturate and gave the 1960 Chile earthquake a magnitude of 9.5 (Kanamori 1977). Because magnitude rises by two-thirds of the logarithm of the moment, each whole step on the scale corresponds to about 32 times more seismic moment.

For very large earthquakes, moment magnitude gives the most reliable estimate of size (USGS n.d.h). USGS computes a W-phase moment magnitude, Mww, for all earthquakes of magnitude 5.0 and larger worldwide and treats it as authoritative when available (USGS n.d.g). Different procedures often give slightly different magnitudes for the same earthquake, which is why early reports can change as more data arrive (USGS n.d.h).

Magnitude versus Intensity: The Modified Mercalli Scale

Magnitude describes the size of an earthquake at its source. Intensity describes the strength of shaking at a particular place. An earthquake has one magnitude but many intensities, one for each place where its shaking is assessed (USGS n.d.j).

In the United States, intensity is assigned on the Modified Mercalli Intensity scale, developed by Harry Wood and Frank Neumann in 1931 (Wood and Neumann 1931). Its levels are written in Roman numerals and rise from imperceptible shaking to catastrophic destruction (USGS n.d.k). The scale ranks observed effects rather than recording a measurement from an instrument (USGS n.d.k).

Public reports now feed intensity maps directly. The USGS Did You Feel It? program collects accounts from people who felt an earthquake and converts them into community intensity values. Where both instruments and reports are available, those values are used to calibrate the equations that convert measured ground motion into intensity on ShakeMap (USGS n.d.l).

Frequently asked questions

What are the layers of the Earth?
The Earth has a rocky crust, a mantle that extends to about 2,900 kilometers deep, a liquid outer core and a solid inner core. In the standard reference model, the inner core has a radius of about 1,220 kilometers. All of these boundaries were found by studying how seismic waves travel through the planet.
Why can’t S waves travel through the outer core?
S waves move rock by shearing it, and a liquid has no resistance to shearing. The outer core is liquid, so S waves stop at the core–mantle boundary. This leaves no direct S waves at stations more than about 104 degrees from an earthquake.
What is the seismic shadow zone?
The P-wave shadow zone is the band between about 104 and 140 degrees from an earthquake that receives no direct P waves. The liquid outer core bends P waves away from that band and blocks S waves entirely. Weak P waves found inside the zone led Inge Lehmann to propose the inner core in 1936.
What is the difference between the epicenter and the hypocenter?
The hypocenter is the point inside the Earth where the rupture begins. The epicenter is the point on the surface directly above it. The distance between them is the focal depth.
Is the Richter scale still used?
Richter’s local magnitude, ML, is still calculated for small and moderate earthquakes with modern instruments. For large earthquakes, it and other amplitude-based scales saturate, so seismologists report moment magnitude, which is based on the area and slip of the fault.
What is the difference between magnitude and intensity?
Magnitude measures the size of an earthquake at its source, and each earthquake has one. Intensity measures how strongly the ground shook at a particular place, so one earthquake has many intensities. In the United States intensity is given on the Modified Mercalli scale in Roman numerals.

References

  1. Brush, Stephen G. 1980. "Discovery of the Earth’s Core." American Journal of Physics 48: 705. doi.org/10.1119/1.12026.
  2. Dziewonski, Adam M., and Don L. Anderson. 1981. "Preliminary Reference Earth Model." Physics of the Earth and Planetary Interiors 25 (4): 297–356. doi.org/10.1016/0031-9201(81)90046-7.
  3. Dziewonski, A. M., and F. Gilbert. 1971. "Solidity of the Inner Core of the Earth Inferred from Normal Mode Observations." Nature 234: 465–66. doi.org/10.1038/234465a0.
  4. Gutenberg, B. 1914. "Ueber Erdbebenwellen. VII A. Beobachtungen an Registrierungen von Fernbeben in Göttingen und Folgerung über die Konstitution des Erdkörpers." Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse 1914: 125–76.
  5. Hanks, Thomas C., and Hiroo Kanamori. 1979. "A Moment Magnitude Scale." Journal of Geophysical Research 84 (B5): 2348–50. doi.org/10.1029/JB084iB05p02348.
  6. Herak, Davorka, and Marijan Herak. 2007. "Andrija Mohorovičić (1857–1936): On the Occasion of the 150th Anniversary of His Birth." Seismological Research Letters 78 (6): 671–74.
  7. IRIS (Incorporated Research Institutions for Seismology). n.d. "How Are Earthquakes Located?" Fact sheet. clean.iris.edu/hq/inclass/fact-sheet/13.
  8. Jeffreys, Harold. 1926. "The Rigidity of the Earth’s Central Core." Monthly Notices of the Royal Astronomical Society, Geophysical Supplement 1 (7): 371–83. doi.org/10.1111/j.1365-246X.1926.tb05385.x.
  9. Kanamori, Hiroo. 1977. "The Energy Release in Great Earthquakes." Journal of Geophysical Research 82 (20): 2981–87. doi.org/10.1029/JB082i020p02981.
  10. Kious, W. Jacquelyne, and Robert I. Tilling. 1996. This Dynamic Earth: The Story of Plate Tectonics. U.S. Geological Survey. "Inside the Earth." pubs.usgs.gov/gip/dynamic/inside.html.
  11. Kölbl-Ebert, Martina. 2001. "Inge Lehmann’s Paper: ‘P′’ (1936)." Episodes 24 (4): 262–67.
  12. Lehmann, Inge. 1936. "P′." Publications du Bureau Central Séismologique International, Série A, Travaux Scientifiques 14: 87–115.
  13. Mohorovičić, Andrija. 1910. "Potres od 8. X. 1909." Godišnje izvješće Zagrebačkog meteorološkog opservatorija za godinu 1909. English translation: "Earthquake of 8 October 1909." 1992. Geofizika 9 (1): 3–55. hrcak.srce.hr/20133.
  14. Oldham, R. D. 1906. "The Constitution of the Interior of the Earth, as Revealed by Earthquakes." Quarterly Journal of the Geological Society 62: 456–75.
  15. Richter, C. F. 1935. "An Instrumental Earthquake Magnitude Scale." Bulletin of the Seismological Society of America 25 (1): 1–32. doi.org/10.1785/BSSA0250010001.
  16. USGS (U.S. Geological Survey). n.d.a. "Two Kinds of Waves Are Generated by Earthquakes and Travel through Solid Rock." The Great 1906 San Francisco Earthquake. earthquake.usgs.gov/earthquakes/events/1906calif/18april/earthwaves.php.
  17. USGS. n.d.b. "Shadow Zone." Video. www.usgs.gov/media/videos/shadow-zone.
  18. USGS. n.d.c. "Determining the Depth of an Earthquake." www.usgs.gov/programs/earthquake-hazards/determining-depth-earthquake.
  19. USGS. n.d.d. "Locating Earthquakes in the Yellowstone Region." Yellowstone Volcano Observatory. www.usgs.gov/center-news/locating-earthquakes-yellowstone-region.
  20. USGS. n.d.e. "Why Do So Many Earthquakes Occur at a Depth of 10km?" www.usgs.gov/faqs/why-do-so-many-earthquakes-occur-depth-10km.
  21. USGS. n.d.f. "Technical Terms Used on Event Pages." Archived September 28, 2012. webarchive.library.unt.edu/web/20120928115346/http://earthquake.usgs.gov/earthquakes/eventpage/terms.php.
  22. USGS. n.d.g. "Magnitude Types." www.usgs.gov/programs/earthquake-hazards/magnitude-types.
  23. USGS. n.d.h. "Moment Magnitude, Richter Scale – What Are the Different Magnitude Scales, and Why Are There So Many?" www.usgs.gov/faqs/moment-magnitude-richter-scale-what-are-different-magnitude-scales-and-why-are-there-so-many.
  24. USGS. n.d.i. "Earthquake Magnitude, Energy Release, and Shaking Intensity." www.usgs.gov/programs/earthquake-hazards/earthquake-magnitude-energy-release-and-shaking-intensity.
  25. USGS. n.d.j. "What Is the Difference between Magnitude and Intensity? What Is the Modified Mercalli Intensity Scale?" www.usgs.gov/faqs/what-difference-between-magnitude-and-intensity-what-modified-mercalli-intensity-scale.
  26. USGS. n.d.k. "The Modified Mercalli Intensity Scale." www.usgs.gov/programs/earthquake-hazards/modified-mercalli-intensity-scale.
  27. USGS. n.d.l. "What Is DYFI For?" Did You Feel It? earthquake.usgs.gov/data/dyfi/background.php.
  28. Wood, Harry O., and Frank Neumann. 1931. "Modified Mercalli Intensity Scale of 1931." Bulletin of the Seismological Society of America 21 (4): 277–83.
Next in In DepthAftershocks, Liquefaction and Other Earthquake Hazards ExplainedAll In Depth articles
sisma
The Pulse of a Living Planet
Loading earthquakes…